AWS-Flush Bucket
Automatic Flush Bucket - A cost-saving solution for cleaning rainwater tanks
PRODUCT DESCRIPTION
The most operationally cost-effective and most commonly installed solution for cleaning reservoirs. The AWS-Flush Bucket which is installed outside of the medium (storm water, drainage water etc.), removes deposits without external energy and extremely effectively due to a strong flushing wave. The shape of the AWS-flush bucket constructed on the basis of FEM-models is characterised by an optimal torque curve and material usage rate with a low net weight and is the most modern construction on the market.
Your Benefits
- Lowest maintenance efforts
- Uses available water source, incl. stormwater
- Easy to retrofit into existing structures
- Weight optimized stainless steel construction
- Low operation noise
- Standardized sizes from 200 l/m to 2600 l/m
- Total lengths up to 10 m per one unit
Applications
- Rain basins, reservoirs or sedimentation basins with temporary accumulation
- Basically suitable for every type of basin (exception: round basins)
- Flushing distances of up to 70 m possible, depending on the basic conditions (design of the pelvic floor with longitudinal and transverse slopes, roughness of the internals, discharge height and flushing volume)
- Mounting and installation outside of the medium, mounting on or on-side walls, on-end walls and under ceilings
- Single flush track up to 70 m long and 12 m wide
- Additional requirements can be solved by special designs.
Specialities
- Very good compact rinsing surge due to tilting and torque behaviour, no noticeable mechanical noises as well as low loads on mounting structure and construction, thus long service life
- Use of stainless steel investment casting and capsule housings for bearing equipment
- Hollow shaft coupling for coupling multiple AWS flushing buckets for simultaneous and effective flushing of multiple flush tracks
- Automatic function monitoring with sensor kit
- Certificate of individual torque check
- Minimal maintenance due to the arrangement outside the water reservoir, with the use of encapsulated stainless steel bearings
Questions about the product?
Contact us!
Christopher Becker
Head of Product Management
Tel:+49 291 9929 23
Email: Christopher.Becker@hst.de
Richard Ernst
Executive Director
+49 (0) 7175-921032
Email: Richard.Ernst@hst.de
Features
- Generation of a powerful, compact water surge
- Automatic tilting when filled without unlocking
- Automatic and quiet reset to basic position for next flushing event
- Rinsing water including dirt is collected in a sump of sufficient size
- In case of extreme soiling, the flushing process must be repeated.
Extensions
Machines & Systems
- Rinse water feed
- Locking device
- Special sizes
- Bearing encapsulation
IT & Automation
- Sensor kit
- Control module
- Switching system
- Digital operating and service book
HST 中国
HST 国际- +++ very suitable
- ++ suitable
- + in exceptional cases
- – not suitable
CONTACT OUR SERVICE TEAM
Our technical and operational equipment service team will assist you with the planning and execution of all machine and plant services and IT & Automation.
Send us your inquiry and we will suggest a solution.
Tel: +49 291 9929 0
Fax: +49 291 7691
E-Mail: planerservice@hst.de
Product in the System
